Preliminary data report March 28, 1995 A. Cruise Narrative A.1 Highlights A.1.a Expedition Designation AR16/AR06 A.1.b EXPOCODE: 07AL991/1 through /4 A.1.c Chief Scientist: Eberhard Hagen, IfMW A.1.d Ship: R/V A.V.Humboldt A.1.e Ports of Call: Leg 1: Rostock, Germany to Lisboa, Portugal Leg 2: Lisboa to Casablanca, Marocco Leg 3: Casablanca to Lisboa Leg 4: Lisboa to Rostock A.1.f Cruise Dates: Leg 1: August 20 to August 30, 1991 Leg 2: September 2 to September 13, 1991 Leg 3: September 17 to October 15, 1991 Leg 4: October 18 to October 25, 1991 A.2 Cruise Summary A.2.a Geographic boundaries A.2.b Number of stations occupied During the cruise a total of 196 CTD/rosette stations were occupied using a CTDO equipped with a rosette of 12*2.7 l teflon-type water sampling bottles. o CTDO and sound speed; o salinity and oxygen of water samples; o temperature and pressure by reverse deep sea thermometers o air-pressure, temperature, humidity up to an attitude of about 30 km by radiosondes: 56 starts o stepwise current meter profiling (0-500 m) using o GPS navigation system: 58 stations o temperature/salinity in 2 m depth between stations continuously: 54 days o skin-SST by means of Heiman KT4 radiometer (10-12 *10**-6 m): 54 days o meteorological standard parameters: 54 days o pyranometer: 54 days A.3 Principal Investigators Table 1: Principal Investigators* Name Responsibility Institution E. Hagen CTDO,S,O2,Current Profiles IfMW R.Feistel SST IfMW E.Mittelstaedt Currents BSH * See Table 2 for list of Institutions Table 2: List of Institutions Abbreviation Institution BAH Biologische Anstalt Helgoland Martin-Luther-King-Platz 3 Hamburg, Germany 20146 BSH Bundesamt fuer Seeschiffahrt und Hydrographie Postfach 30 12 20 Hamburg, Germany D-20305 IfMW Institut fuer Meereskunde Warnemunde Seestr. 15 D-18119 Rostock-Warnemande Germany IOW Institut fuer Ostseeforschung Warnemuende, Germany d-18119 A.4 Scientific Programme and Methods A.5 Major Problems The CTD data of station 252-253 were disturbed and have been discarded. At station 276 the OM-87 probe No 1 was lost during the up cast when the cable parted. From station 277 to 434 the OM-87 probe No 2 was used. A.6 Other Incidents of Note A.7 List of Cruise Participants Table 3: List of Cruise Participants Name Responsibility Institution* Leg 1-4 Eberhard Hagen Chief Scientist, radiosondes starts IfMW(IOW) Stefan Weinreben CTD-Software IfMW(IOW) Henry Will CTD-Hardware, current profiling IfMW(IOW) Rainer Feistel Skin-Bulk-SST IfMW(IOW) Christoph Zuelicke Skin-Bulk-SST HUB Guenter Plueschke Salts, CTD Winch IfMW(IOW) Wolfgang Hub Oxygen, CTD Winch IfMW(IOW) Dieter Fritsch Precision Mechanics IfMW(IOW) Leg 1-2 Holger Klein Moorings BSH Holger Giese Moorings BSH Leg 4 Guido Schmuck Skin-Bulk-SST IRSA *See Table 2 for list of Instituions B. Underway Measurements B.1 Navigation and bathymetry B.2 Acoustic Doppler Current Profiler (ADCP) B.3 Thermosalinograph B.4 XBT and XCTD B.5 Meteorological observations B.6 Atmospheric chemistry C. Hydrographic Measurements C.1 CTDO The CTDO and the sensors are manufactured at the institu fuer Meereskunde Warnemuende, Germany. The CTDO is an OM-87 = Oceanological Measuring System, consisting of an expandable dividing CTDO-probe, interfaced through a special designed slave-computer, a meteorological subsystem interfaced by a second slave-computer and a master-PC. The IfMW meteorological subsystem interfaced by a second slave-computer and a master-PC. The IfMW began to develop oceanographic measuring systems in the 1960's. The first computer controlled CTD-system, OM-75 (Moeckel, 1980) was taken into service in 1976. The new generation: OM-87 has been used since 1988. The CTD is equipped with frequency-analogous sensors at standard ports, developed and manufactured by IfMW; the oxygen sensor together with FSI "Kurt Schwabe", Meinsberg, Germany. C.1.a Sensor Configuration List The various sensors used on the different CTDs are listed in Table 3 by station and CTD number. Table 4: CTD sensor configuration CTD/Stat. No. Parameter Sensor Resolution Precision CTD No. 1/Sta. 240-276 Pressure P251 0.1 dbar 2 dbar CTD No. 2/Sta. 277-311 Pressure P600 0.2 dbar 5 dbar CTD No. 2/Sta. 312-342 Pressure P252 0.1 dbar 2 dbar CTD No. 2/Sta. 343-434 Pressure P601 0.2 dbar 5 dbar CTD No. 1/Sta. 240-276 Temp T102 0.0015 K 0.01 K CTD N0. 2/Sta. 277-434 Temp T106 0.0015 K 0.01 K CTD No. 1/Sta. 240-251 Conductivity C854 0.0008 mS/cm CTD No. 1/Sta. 254-276 Conductivity C858 0.0008 mS/cm CTD No. 2/Sta. 277-311 Conductivity C854 0.0008 mS/cm CTD No. 2/Sta. 312-434 Conductivity C884 0.0008 mS/cm CTD No. 1/Sta. 240-276 Oxygen O022 0.01 ml/l 0.1 ml/l CTD No. 2/Sta. 277-295 Oxygen O027 damaged CTD No. 2/Sta. 312-325 Oxygen O023 damaged CTD No. 1/Sta. 240-276 Speed of Sound V216 0.025 m/s 0.3 m/s CTD No. 2/Sta. 277-279 Speed of Sound V217 0.025 m/s 0.3 m/s CTD No. 2/Sta. 280-311 Speed of Sound V217 damaged All sensors were calibrated before the cruise at the calibration laboratory of IfMW. The oxygen sensor was recalibrated during the cruise at the first station with water samples. The calibration constants of all sensors were checked up by the in situ comparisons of p, T, C, O2. B.1.b CTDO The down cast data were recorded on hard disk. Sampling rate: 1 record in 1.2s = 0.83 HZ integration time of sensors: 1s lowering speed of CTD: 1.0 m/s time constants: pressure and temperature sensors = 0.1 s conductivity sensor = 0.1 s at 1 m/s lowering speed. The calibration constants of pressure, temperature, conductivity, sound speed sensors and the recalibration constants of the oxygen sensor were used over the whole cruise. The check measurements of CTDO and water sample data (in situ comparisons) were used for calculating the post-cruise corrections. B.1.c Post-Cruise CTD Data Processing The raw data are digitized frequencies, which had been converted to physical units of pressure, temperature, conductivity, oxygen and sound speed. A validation routine was applied to the CTDO down cast data (LASS et al., 1983), to eliminate: 1. data values, which are not physically realizable. 2. Random errors by recursive low-pass filtering (Acheson, 1975). 3. Systematic errors caused by the effect of ship's rolling and pitching on the lowering rate of CTD. Records acquired while CTD is moving down too slowly have been discarded to enforce a strict monotonic sequence in pressure. The so called eddy-algorithm in connected view with the values of sensor integration time and lowering rate reduce the effect of different time lags of the sensors to minor importance. The calculation of salinity from conductivity and conversion of dissolved oxygen of volumetric to weight concentration were done last after correcting the data as described below. Dissolved oxygen was converted according to the WOCE Operations Manual (1991). The data haven't been averaged finally in 2 dbar increments because of the low sampling rate of the CTD and a great amount of discarded records in the course of data processing, up to 50% on average. C.1.d CTD Post-Cruise Corrections In order to get the CTDO to match the water sample and, respectively, the thermometer data that following fits defined in Table 5 were applied to the CTDO data. Table 5: CTD calibration Coefficients ------------------------------------------------------------------------- CTD No./Sta. No. Sensor Fitting Fitting Parameter Polynomials ------------------------------------------------------------------------- pressure linear fit PRESfitted=A0+A1*PRES A0 A1 240-251 P251 3.8 1.006 254-276 P251 3.8 1.006 pressure: data discarded 252-253 P251 pressure: temperature correction PREScorr.=PRES+A0+A1*TEMP A0 A1 277-311 P600 36.2 1.38 pressure: linear fit: PRESfitted=A0+A1*PRES A0 A1 312-342 P252 1.41 1.019 343-434 P601 30.44 0.96943 Temperature: no fit; measured data were of higher quality than the thermometer data 240-251 T102 254-276 T102 277-434 T106 temperature: data discarded 252-253 T102 conductivity: pressure correction: CONDcorr.=COND+A0+A1*PRES A0 A1 240-251 C854 -7.315E-2 7.409864E-5 conductivity: data discarded 252-253 C853 conductivity: time dependend correction CONDcorr.=COND+A0+A1*TIME TIME/hours=Beginning time of cast(in continuously caunted hours of the year: January 1; 0 o'clock: TIME=0 hours) A0 A1 254-268 C858 13.03789 -2.20388E-2 269-276 C858 -1.30243 2.178216E-4 conductivity: quadratic fit: CONDfitted=A0+A1*COND+A2*COND**2 A0 A1 A2 277-311 C854 1.8108 0.921699 8.507983E-4 conductivity: time dependend correction CONDcorr.=COND+A0+A1*TIME TIME/hours=Beginning time of cast(in continuously caunted hours of the year: January 1; 0 o'clock: TIME=0 hours) A0 A1 312-339 C884 9.41769 -1.496255E-3 340-350 C884 -42.25939 6.661E-3 351-381 C884 1.72513 -2.265E-4 382-426 C884 -2.18171 3.68E-4 427-434 C884 -1.410598 2.52E-4 oxygen: linear fit: OXYGfitted=A0+A1*OXYG (ml/l) A0 A1 240-251 O022 0.654 0.9744 oxygen: pressure correction OXYGcorr.=OXYGfitted+A0+A1*PRES (ml/l) A0 A1 254-276 O022 0.694 1.3549E-4 oxygen: data discarded 252-253 O022 277-295 O027 312-325 O023 sound speed: no fit 240-251 V216 254-276 V216 277-279 V116 sound speed: data discarded 252-253 V216 280-311 V217 C.1.e Calibration All sensors were precalibrated at the calibration laboratory of IfMW. Each oxygen sensor was recalibrated with water samples during the cruise at the first station when it was taken. The calibration constants of all sensors were checked up by in situ comparisions of p, T,C, O2. C.1.f CTD Errors and Noise During the cruise located faulty sensors were replaced as listed above in the CTD sensor configuration list. After the cruise following sensor failures were detected and the data were discarded: Oxygen from station 277-434 Speed of sound from station 280-311 C.2 Water sampling for In Situ Comparisons After finishing the down cast (CTDO-recording), the CTD was lifted and stopped within well mixed layers. After 10 minutes waiting to let the deep-sea thermometers adapt to the surrounding temperature two water bottles were tripped while a short time CTDO recording. The deep sea thermometers (2 protected and 2 unprotected) were reversed simultaneously with the first bottle tripping. When the first bottle of each sampling depth tripped correctly the water samples ( 2 dissolved oxygen and 2 salinity) were drawn from these bottles, otherwise from the second ones. The S and O data of the water samples so as the reverse temperature and pressure data were used for the post-cruise corrections of CTDO data. C.3 Salinity The water sample salinities were measured with a Guildline Autosal Model 8400A salinometer, manufactured by Guildline Instruments Ltd., Smiths Falls, Canada. The salinometer was standardized weekly with IAPSO Standard Seawater (SSW) Batch P 111. Differences in standardization readings were less than 3. The salinometer manufacturer claims a precision of 0.0002 and an accuracy of better than 0.003; better than 0.001 when the laboratory temperature is constant (=/- 1K) and about 1-2 K below the bath temperature of the salinometer. C.4 Oxygen The dissoloved oxygen samples were analysed by the Winkler Titration Method modificated by CARRITT and CARPENTER (1966). Temperature (reverse thermometers) The following reverse thermometers were used: manufactured by: VEB Thermometerwerk Geraberg,Germany scale graduated in -------------------------------------------------------------- pressure protected -2...+30degC 0.1K unprotected -2...+30degC 0.1K -------------------------------------------------------------- Duplicate Water Samples Two or three duplicate salinity and oxygen samples were drawn from a bottle usually. The differences between the salinity and oxygen measurements of the duplicate water samples and the standard deviation of the differences are shown in the following table: average difference maximum diff. standard deviation between samples of all differences ---------------------------------------------------------------- salinity 0.0015 PSU 0.009 PSU 0.0018 oxygen 0.011 ml/l 0.03 ml/l 0.0189 ---------------------------------------------------------------- C.5 Laboratory and Sample Temperatures The laboratory was temperature controlled :24...26 degC. The bath temperature of the Autosal salinometer was set to 27 degC. Salinity and oxygen samples had been tempered at room temperature when measured. C.5.a Standards used I.A.P.S.O Standard Seawater ,Batch P111 , 7.2.89 During the cruise this batch was used only. D. Acknowledgments E. References Acheson, D.T., 1975. Data Editing--Subroutine EDITQ. NOAA Technical Memorandum EDS CEDDA-6. Lass, H.U., Wulff, C., Schwabe, R., 1983. Methoden und Programme zur automatischen Erkennung und Korrektur von Messfehlern in ozeanologischen Vertikalprofilen. Beitrage zur Meereskunde, Heft 48, pp 95-111, Berlin. Moeckel, F., 1980. Die ozeanologische Messkette OM 75, eine universelle Datenerfassungsanlage fuer Forschungsschiffee. Beitraege zur Meereskunde, Heft 43, pp 5-14, Berlin. Wlost, K.-P., 1993. The OM-87-System: a brief description. Institut of Baltic Reasearch Warnemnde, Germany. unpublished paper. Unesco, 1983. International Oceanographic tables. Unesco Technical Papers in Marine Science, No. 44. Unesco, 1991. Processing of Oceanographic Station Data, 1991. By JPOTS editorial panel. WOCE Operations Manual, Vol. 3, Sec.3.1, Part 3.1.2, 1991. WHP Office Report WHPO 90-1, WOCE Report No. 67/91, Woods Hole, Mass., USA. WOCE Operations Manual, Vol. 3, Sec 3.1, Part 3.1.3: WHP Operations and Methods; C.H. Culberson: Dissolved Oxygen, WHP Office Report WHPO 91-1, WOCE Report No. 68/91,1991, Woods Hole, Mass., USA. F. WHPO Summary Several data files are associated with this report. They are the ebc2.sum, ebc2.hyd, ebc2.csl and *.wct files. The ebc2.sum file contains a summary of the location, time, type of parameters sampled, and other pertient information regarding each hydrographic station. The ebc2.hyd file contains the bottle data. The *.wct files are the ctd data for each station. The *.wct files are zipped into one file called ebc2.wct.zip. The ebc2.csl file is a listing of ctd and calculated values at standard levels. **NOTE** Preliminary *.csl files were not created due to the CTD data being provided with non-uniform levels. Cruise Plan Line AR6 Lisbon to Madeira to Morocco Logistical requirements: Length (nm): 1590 Small Volume Stations: 54 Repeats/Yr: 4x No. of Yrs: 1 Program constraints: Vessel to be equipped with GPS and ADCP and done once in each season with 30 nm station spacing. Accuracy requirements spelled out by CP1-4. Operator: GERMANY Chief scientist: Hagen/IOW Ship: VON HUMBOLDT, Cruise/leg: 07AL991/2 Cruise date: Sept. 2-Sept. 1 1991 Cruise plan received: Sept. 90 Cruise report received: Sept. 93 ADCP: Mittelstaedt/BSH CTD: Hagen/IOW Meteorological measurements: Unknown Oxygen: Hagen/IOW Salinity: Hagen/IOW Thermosalinograph: Feistel/IOW Notes: Work also done in AR16 area. Operator: GERMANY Chief scientist: Hagen/IOW Ship: VON HUMBOLDT, Cruise/leg: 07AL991/3 Cruise date: Sept. 17-Oct. 1 1991 Cruise plan received: Sept. 90 Cruise report received: Sept. 93 ADCP: Mittelstaedt/BSH CTD: Hagen/IOW Meteorological measurements: Unknown Oxygen: Hagen/IOW Salinity: Hagen/IOW Thermosalinograph: Feistel/IOW Notes: Work also done in AR16 area.